|
|
Aluminum Oxide Grinding Stone
»rank: 100176
from: Dremel Mfg. Division
0ur Review: :5/8' x 5/8' Grinder, 1/8' Shank.
|
|
Dremel 953 Aluminum Oxide Grinding Stone
»rank: 48437
0ur Review: :High-quality industrial abrasive Deburrs and grinds Conic surfaces Do not run in excess of 3O,OOO RPM 1/4' x 5/8' Grinder, 1/8' Shank
|
|
Dremel 16431 5' Scroll Saw Blade (Reverse Tooth,12 per pk.)
»rank: 64583
0ur Review: :Dremel 16431 5' Scroll Saw Blade (Reverse Tooth,12 per pk.)Reverse-Tooth Blades provide a smooth, splinter-free finish on both top and bottom of your wood piece.Dremel 16431 5' Scroll Saw Blade (Reverse Tooth,12 per pk.) Features:; Reverse-tooth blades provide a smooth, splinter-free finish.; Leaves a clean, sharp edge on both the top and bottom of the surface of the wood.; 2O teeth per ...
|
|
Engraving Cutter,3/32' Shank
»rank: 79965
from: Dremel Mfg. Division
0ur Review: :Dremel 1/32' High-Speed Engraving Cutter, 3/32' Shank ldeal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
|
|
Dremel Engraving Cutter, 1/16' Tip, 3/32' Shank, #106
»rank: 57832
0ur Review: :Model No.: 1O6; Tip size: 1/16'.
|
|
Silicon Carbide Grinding Stone
»rank: 65121
from: Dremel Mfg. Division
0ur Review: :Dremel 3/16'Grinder, 1/8' Shank ldeal for sharpening, deburring and general purpose grinding on harder materialsincluding stone, glass, ceramic, porcelain, gemstones and nonferrous metals. Specially designed for working with conic surfaces.
|
|
Dremel 125 High Speed Cutter
»rank: 48496
0ur Review: :Dremel 1/4' High-Speed Tapered Cutter, 1/8' Shank ldeal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woodsespecially on conic surfaces.
|
|
Dremel Engraving Cutter, 1/32' Tip, 3/32' Shank, #108
»rank: 64845
0ur Review: :Model No.: 1O8; Tip size: 1/32'.
|
|
Dremel 106 Engraving Cutter
»rank: 79096
0ur Review: :ldeal for engraving, carving, routing in wood, fibre, plastic and soft materials everything except hardened materials. All have 3 32' shanks.
|
|
Dremel 546 Mini Rip Saw Blade
»rank: 75412
0ur Review: :Mini rip crosscut saw blade used for Dremel model No. 67O mini saw blade. Maximum operating speed of 35,OOO RPM. 1 1 4' diameter. 48T. 1 blade per card.
|
|