|
Malco Prod. HC1 Hole Cutter
»rank:
0ur Review: :This compact original Malco hole cutter adjusts for cutting 2' to 12' holes in galvanized sheet metal. lt will install into the chuck of a standard electric drill. lt features a lightweight aluminum frame and high speed bearings at top and bottom of drill
|
|
Malco Prod. S6 Hand Seamer
»rank: 267002
0ur Review: :6' wide large jaws produce uniform, accurate bends in sheet steel and nonferrous metals, also minimize buckling, and bowing of metal. Designed for all the metal trades, including HVACR installation, roofing, and siding applications and commercial building
|
|
'NICHOLS WIRE' 119 ALUMINUM SIDING NAIL 1-1/4'
»rank: 207218
0ur Review: :
|
|
Northwest Metal' 513002 Siding Corners (Set of 200)
»rank: 207218
0ur Review: :
|
|
PHIFER WIRE (PHIFERWIRE) 3001752 PHIFER WIRE (PHIFERWIRE) 3001752 ALUMINUM SCREEN CLOTH 18 x 16 NOMINAL MESH COUNT 36X84' BRITE-KOTE FINISH (PACK OF 8)
»rank: 207218
0ur Review: :
|
|
PHIFER WIRE (PHIFERWIRE) 3001753 PHIFER WIRE (PHIFERWIRE) 3001753 ALUMINUM SCREEN CLOTH 18 x 16 NOMINAL MESH COUNT 48X84' BRITE-KOTE FINISH
»rank: 207218
0ur Review: :
|
|
PVC Coil Stock
»rank: 228524
0ur Review: :24' x 5O' roll. White smooth 1 side, wood grain textured other.
|
|
RECESS J-BLOCK
»rank: 228524
0ur Review: :2-piece design. Used for trimming around receptacles, hose bibs, and other small fixtures without removal. Wood grain textured surface and routered edge. Durable polypropylene. For use with all profiles of aluminum, vinyl, wood siding, or stucco. Surface dimensions: 5-1/4' x 7'. Flange dimension: 5-7/8' x 7-1/2'. J-Channel l.D.: 7/8'. Knockouts: 2-1/4' x 3-7/8'. No. MBL0CKR O4: White No. MBL0CKR FL: Almond No. MBL0CKR EQ: Gray No. MBL0CKR 52: Clay No. MBL0CKR BF: Tan No. MBL0CKR 3O: ...
|
|
|
RECESS J-BLOCK
»rank: 228524
0ur Review: :2-piece design. Used for trimming around receptacles, hose bibs, and other small fixtures without removal. Wood grain textured surface and routered edge. Durable polypropylene. For use with all profiles of aluminum, vinyl, wood siding, or stucco. Surface dimensions: 5-1/4' x 7'. Flange dimension: 5-7/8' x 7-1/2'. J-Channel l.D.: 7/8'. Knockouts: 2-1/4' x 3-7/8'. No. MBL0CKR O4: White No. MBL0CKR FL: Almond No. MBL0CKR EQ: Gray No. MBL0CKR 52: Clay No. MBL0CKR BF: Tan No. MBL0CKR 3O: ...
|
|
RECESS J-BLOCK
»rank: 228524
0ur Review: :2-piece design. Used for trimming around receptacles, hose bibs, and other small fixtures without removal. Wood grain textured surface and routered edge. Durable polypropylene. For use with all profiles of aluminum, vinyl, wood siding, or stucco. Surface dimensions: 5-1/4' x 7'. Flange dimension: 5-7/8' x 7-1/2'. J-Channel l.D.: 7/8'. Knockouts: 2-1/4' x 3-7/8'. No. MBL0CKR O4: White No. MBL0CKR FL: Almond No. MBL0CKR EQ: Gray No. MBL0CKR 52: Clay No. MBL0CKR BF: Tan No. MBL0CKR 3O: ...
|